Lifebelts on stands (Set of 2)
This item comes with the main post to stand alongside any harbour of river setting, and the post can be removed should you wish to mount the lifebelt onto a building or wall.

This is a 3D printed product.

Tools required:
Razor saw or similar
Fine file or sandpaper
Paints

This product is ready to paint and plant.

** These items have been produced using our new high end 3D printer constructed with translucent or coloured resin depending on the size of the item and detail it contains. UV cured resin tends to be a little more brittle than normal resin so take extra care when removing parts from the sprue, using a razor saw or similar is recommended.

The use of a primer or base coat is recommended when using acrylic paints - I use Tamiya XF19 sky grey.**

Lifebelt (No Post): H: 14mm x W: 16mm x D: 4mm
Lifebelt (With Post): H: 32mm x W: 16mm x D: 4mm
Material: 3D printed resin
Weight: 12grms