Crosses and monument gravestones.

This is the first set of 3D printed gravestones, and contains a round monument, celtic cross, standard cross and three flat headstones.

There is an images of the local grave yard here from which we based our products on.

Tools required:
Razor saw or similar
Fine file or sandpaper
Paints

This product is ready to paint and plant.

** These items have been produced using our new high end 3D printer constructed with translucent or coloured resin depending on the size of the item and detail it contains. UV cured resin tends to be a little more brittle than normal resin so take extra care when removing parts from the sprue, using a razor saw or similar is recommended.

The use of a primer or base coat is recommended when using acrylic paints - I use Tamiya XF19 sky grey.**

Monument:	H: 32mm x W: 7mm (At Base)
Celtic Cross:	26mm x W: 9mm (Arms of cross)
Standard Cross:	H: 22mm x W: 8mm (Arms of cross)
Flat Headstone:	H: 16mm x W: 10mm (At Base of large stone)
Material:	UV cured 3D printer resin
Weight:	0.019Kg